Rotating Motor Nacelles

With just the flip of a switch on your transmitter the motor nacelles gently rotate to transition your V-Hawk into, and out of, the hover. As they do the flight controller automatically changes the flight mode from a stabilized quad set-up to fixed-wing elevon control.

Tough and Practical

The fuss-free plug-in tricycle undercarriage facilitates storage, can be removed without tools, and is built to absorb the odd heavy landing!

 

In full control

Capable 9g elevon servos and a beefy 17g metal gear rotor tilt servo offer assured control and keep the V-Hawk locked-in through all phases of flight.

Factory Assembled

With the exception of adding the tail fin, the V-Hawk comes factory assembled and pre-painted in an eye-catching US Marines-style colour scheme.

 

Brushless Power

Four 2730kV brushless motors, four 12A brushless ESCs and a 1300mAh 4S LiPo offer a truly powerful and reliable combination.

Unique and Captivating

Perfect for experienced pilots the V-Hawk provides an ideal opportunity to fly an aircraft that not only presents a challenge but a unique and captivating sight in the air.

 

Features

  • Arrives painted and trimmed in eye-catching US Marines scheme.
  • innovative flight control board allows the V-Hawk to take off vertically, fly like a gyro stabilized quad, then transition to forward flight and revert to elevon control.
  • Rotating motor nacelles allow you to fly from the smallest of spaces.
  • Almost 98% built, right out of the box - just add the tail fin (glue included).
  • A potentially superb FPV platform.

Specifications

  • Wingspan: 27.5" (696mm)
  • Wing Area: 241 sq. in.
  • Length: 33" (838mm)
  • All-up weight: 31oz (880g)
  • Battery: 4s (16.8V) 1300mAh LiPo
  • Servos: 2 x 9g and 1 x 17g metal gear
  • Motors: 4 x 2730 kV brushless
  • Propellers: 8" diameter (2 x clockwise, 2 x counterclockwise)
  • ESCs: 4 x 12A brushless

What's in the Box

  • 1 x Factory assembled V-Hawk X4 airframe (less fin).
  • 1 x IKONNIK KA-6 6-channel 2.4GHz Hitec Red transmitter.
  • 1 x KA-6 6-channel Hitec Red receiver (RTF and PTF version only).
  • 1 x 1300mAh 4S (16.8V) Li-Po battery.
  • 1 x Fin moulding.

 

  • 2 x propeller set (including dome spinner nuts and adapters).
  • 1 x Plug-in undercarriage and wheel set.
  • 1 x Tube of foam-friendly adhesive.
  • 1 x Quick-Start Guide.