Optional Upgrades: Brushless Power System

iThe affordable Brushless Power System Upgrade Combo (AZSA1629 and AZS1230) includes a brushless ESC plus a powerful 370 brushless motor and mount that install easily in minutes.

Optional Upgrades: Aileron Wing Set

For full 4-channel control and aerobatic capability, the optional aileron-equipped wing set (AZSA1626) can be mounted in place of the standard wing without the need for any modifications.

 

Optional Floats

Extend the versatility of the Ares Gamma with the optional Float Set. Supplied complete with all mounting hardware, effective water rudder and decals to match your model.

Large Inlets

The Gamma V2 features a new cowl with large inlet vents promote a free flow of essential cooling air over the powerful brushless motor, battery and speed controller.

 

Optional Aerial Camera

An optional HD camera (AZSZ2544) allows you to take aerial photos and videos from the plane.

Ready-to-Fly or Pair-to-Fly

To suit your needs, two convenient versions of the model are available, both incorporating Hitec Red protocol: choose either Ready-To-Fly (including a Hitec Red-enabled transmitter and receiver) or Pair-To-Fly (supplied with a Hitec Red receiver that’s compatible with your existing Hitec Red transmitter).

Specifications

  • Wingspan: 38.6 in (980mm)
  • Length: 30.6 in (775mm)
  • Weight w/Battery: 16oz (455)
  • Battery: 2S 7.4V 1000mAh 20C LiPo battery
  • Charger: 2S 7.4V 800mA DC charger with AC adapter
  • Transmitter: IKONNIK KA-6 6-channel (included)
  • On-Board Electronics: Hitec Red enabled receiver, ESC and two 9g servos factory installed in both PTF and RTF Versions

What's in the Box

  • Factory assembled and decorated Gamma V2 airframe.
  • 6-channel 2.4GHz transmitter
  • 2S 7.4V 1000mAh 20C Li-Po battery.
  • 2S 7.4V 800mAh DC LiPo charger.
  • 4 - AA Batteries for the transmitter
  • Quick-start guide.

 

  • The Gamma V2 RTF is factory-assembled and nearly ready-to-fly right out of the box.